What is the Difference Between PVC and ABS Pipe?

PVC and ABS Piping Provide Different Advantages:

ABS piping is the more expensive of the two options, but it’s also stronger than its counterpart. The most desirable feature about this pipe type has to be how lightweight they are. This makes them perfect for any plumbing project that needs a few extra feet or inches around tight corners in your home due to their ability not to corrode like metal pipes do over time on contact with water (which can cause leaking). If you need hot water running through these types of plastic pipes then there shouldn’t be an issue as heat never escapes from this material unlike other materials such as copper which loses heat rather quickly when exposed to cold tap water.

PVC Pipes vs. ABS Pipes

The ABS pipe vs. PVC pipes debate is one that has been going on for decades but it’s a question worthy of consideration if you are thinking about repiping your home in the near future or installing new fittings and fixtures inside your current house. One major difference between these two types of piping systems, which will likely stand out to many homeowners, comes down to BPA usage: while both options come with minor disadvantages such as lower tensile strength or temperature extremes at which they can be installed without causing significant loss in performance (or even failure), only ABS utilizes this material due to its high resistance and versatility against corrosion from deicing salts used by municipalities during winter months; whereas Poly Vinyl Chloride does not.

The FDA has revised its BPA recommendations in recent years, though its current assessment is that the chemical at current levels occurring in food products poses no risk to humans. Animal studies show a growing range of concern about possible hormonal, neurological and cardiological effects among other potential problems. Some local building codes mandate the use of ABS or PVC plastic piping, while others leave this decision up to plumbers and builders.

Weaknesses and Strengths of Plastic Pipes

When it comes to pipes, there are two types: ABS and PVC. One easy way to tell them apart is that ABS pipes are black while PVC pipes are white in color. But since we don’t usually see the inside of a building plumbing system anyways, what plumbers care about most often when looking at these materials for use on their projects varies between different contractors depending upon personal preference or business needs/risks they may be taking with each job (i.e., some installers will choose one type over another if either material has been known have certain advantages). For example, because ABS piping can withstand higher impact without breaking like plastic valves might break under pressure from too-tightly controlled water flow systems which would eat away. In most North American markets, the two types are priced similarly. The difference in price is usually due to higher shipping costs for one type.

Working with PVC or ABS Piping

When working with these materials, the biggest difference is that ABS pipes have a one-step process for connecting them while PVC has two. The cement applied to the end of an ABS pipe can be bonded instantly but requires primer on the ends and full drying before applying or it will not work properly. This extra labor makes this method less efficient than some other methods so when your project costs are more important than how long they last, then you may want to invest in stainless steel instead which does not require any special treatment at all because it’s corrosion resistant already!

When preparing piping projects there are many options available including plastics such as ABS and PVC. Since both types require different treatments during installation processes their efficiency differs greatly depending upon what type of budget constraints that may exist.What is the Difference Between PVC and ABS Pipe?

Visit the Sewer Surgeon to Learn more.

Comments are closed.